LITE-NETICS C9 Cord Green Wire - 12" Spacing - SPT-1 - 100'
Lite-Netics Magnetic Empty Socket Line makes installations on ferrous metals easier and eliminates the need for additional accessories. Due to the unique design, you can still use clips for longer runs.
- • 100' of Green Wire
- • 100 C9 sockets spaced 12" apart
- • Nickel Protected Magnet - Coating that prevents any rusting
- • Works with ferrous metals (will not work on Aluminum)
- • Not recommended for surface temperatures that reach 175 degrees Fahrenheit or higher.
- • UL rated for indoor and outdoor use
- • Use LED bulbs to save up to 90% more energy than incandescent lights
- Maximum bulb load:
- • 250 (C9) LED Retrofit bulbs or 250 feet of line, whichever comes first
- • 100 (C9) 7-watt incandescent bulbs
- • 70 (C9) 10-watt incandescent bulbs
- • Up to 50 feet= 10 amps
- • 51-100 feet= 7 amps
- • 101-150 feet= 5 amps
- • 151-200 feet= 3.5 amps*
- • 201-250 feet= 2.5 amps*
- *Only used for C7/C9 perimeter lighting applications
Maximum amperage for 18/2 gauge wire:
• Case Weight: 5 lbs.
- 1-1 $293.00
- 2-2 $249.10
- 3-7 $234.40
- 8+ $219.80
LITE-NETICS C9 Cord Green Wire - 12" Spacing - SPT-1 - 100'
- • Nickel Protected Magnet - Coating that prevents any rusting
- • Works with ferrous metals - will not work on Aluminum
- • Not recommended for surface temperatures that reach 175 degrees Fahrenheit or higher.
- • Brand: Lite-netics
- • Number of Sockets: 100
- • Spacing: 12"
- • Socket Type: Intermediate, E17, C9
- • Connection: Plug ends
- • Voltage: 110/120
- • Wire Length: 100'
- • Lead Length: 6"
- • Tail length: 6"
- • Wire gauge: 18
- • Rating: SPT-1 - .03 inch insulation thickness
- • UL Rating: indoor and outdoor use
Maximum bulb load:
- 250 (C9) LED Retrofit bulbs or 250 feet of line, whichever comes first
- 100 (C9) 7-watt incandescent bulbs
- 70 (C9) 10-watt incandescent bulbs
Maximum amperage for 18/2 gauge wire:
- Up to 50 feet= 10 amps
- 51-100 feet= 7 amps
- 101-150 feet= 5 amps
- 151-200 feet= 3.5 amps*
- 201-250 feet= 2.5 amps*
*= Only used for C7/C9 perimeter lighting applications
Frequently Asked Questions
Once I install my male plug at the begining of the cord and then cut the cord to the desired length, what do I do with the end of the cord that has no end connector?
Some people simply fold the cord over into a small, 1" loop and then wrap electrical tape around it, however, we generally recommend using a female slide on plug for a safer and cleaner look.